ReNEW Your Rig, Don't Replace It!
The PRG RH+A ReNEW™ LED Retrofit Assembly is an
LED light engine designed to work in conjunction with
the lens tube and shutter assemblies of the Electronic
Theatre Controls (ETC®) Source Four® ellipsoidal.
Exchanging the tungsten light source of the Source Four
with the LED source of the ReNEW Assembly reduces
energy consumption and HVAC costs while producing
lumen output that exceeds a 575W HPL lamp. The
ReNEW light engine draws 190 watts at full output and
3.1 watts during standby.
The ReNEW Assembly is designed around a chipon-board
(COB) LED light source array paired with a
specially designed reflector and lens. The lens and
reflector are designed to provide optimal illuminance
distribution through the Source Four lens. The COB array
is designed for easy upgrade in the future when improved
LEDs become available.
The unit works with all ETC lens tubes - both standard
and Enhanced Definition Lens Tubes (EDLT), and all
Source Four accessories.
The ReNEW Assembly offers a choice of two color
temperatures: The ReNEW Tungsten, a fixed white light
LED with a 3,000K color temperature, and the ReNEW
Daylight, a fixed white light LED with a 5,700K color
The reflector and lamp assembly of the ETC Source Four
can be replaced with the ReNEW LED light engine in less
than a minute.
The ReNEW Assembly can be operated with one, two,
or three channels of DMX control, or operated in userselectable
stand-alone operation for simple installations
or where DMX is not available. A DMX control signal
can be connected and passed through the unit via
one (1) male and one (1) female flush-mount 5-Pin XLR
connector. The DMX connections are optically isolated.
The ReNEW Assembly offers multi-voltage power input
from 90-240 VAC 50/60Hz. Power is connected and can
be fed through the unit via two (2) Neutrik® powerCON®
connections. Up to four (4) ReNEW units may be
linked via power thru connectors. An additional power
connection is available for a 9V DC battery to operate the
control panel for quick setup or shop preparation without
need to connect primary full power to the unit.
Choose from the RHA-RN1.1130 3000K 80CRI Tungsten model or
RHA-RN1.1152 5700K 90CRI Daylight model below,
with your choice of power connector
For complete specifications and drawings see the PRG RH+A ReNEW Datashhet.
Need to see a demo? Check out the demo video below from our friends at Stage Directions, or contact us to arrange your own demo!