Cart #: 0 Items: 0 Total: $0.00
Products
FAQs Design / Build / Install Color Cross Reference Lamp to Fixture Reference

Locoloc® No/Go Gauge For 1/4 & 5/16 Tool

Locoloc® No/Go Gauge For 1/4 & 5/16 Tool
Click here to view Zoom image
Catalog # THSE-0101
Model #: TGA-2P

Use the Locoloc® "Go" "No/Go" Gauge to assure proper swaging of Locoloc aluminum, copper and stainless steel sleeves. These simple "Go" "No-Go" gauges will determine if your Locoloc tools are out of adjustment or alignment.

  • Locoloc Sleeve Gauges GA-1P will measure all oval or stop sleeves used on 1/32", 3/64", 1/16", 3/32", 1/8", 5/32", and 3/16" oval and stop sleeves.
  • Easy to Use:
    • Cable assembly should hold the rated breaking strength of the cable when oval sleeves are used to form a loop or eye in a cable assembly.
    • When proper slot in gauge slips over compressed area of sleeve after swaging then swage is satisfactory.
    • If proper slot does not fit over compressed area of sleeve after swaging, then tool is not properly calibrated.
  • Stop sleeves must be properly compressed and gauged to reach their rated loads which is 1/3 to 1/2 the breaking strength of the cable, depending on the cable diameter.
  • Made in the USA.
 

Availability:   
Limited Supply (More Coming Soon)
$12.50
 

Data not available

Data not available

Data not available

Store Home  |   My Account  |   Contact Us  |   Catalogs  |   Lists  |   Site Map  |   Quick Order  |   Featured Items

Locoloc® No/Go Gauge For 1/4 & 5/16 Tool