Pinsplitter II, with Holster

Pinsplitter II, with Holster
Catalog # THSE-0081
Pinsplitter II, with Holster

Ensure rock solid cable connections by cleaning your 20 amp stage pins with the Pin Splitter!

You can't go without a pin splitter. If you don’t have one, be sure to order a few. The Pin Splitter splits, cleans and straightens all 20 amp stage pins. Here's how it works:
  • 1. To split the stage pin start at a 45° angle to the pin.
  • 2. Straighten the tool and push down gently.
  • 3. When splitting stage pins, be careful not to roll the tool back and forth. This will cause the pins to "flare out," which will make for a poor contact.
  • 4. Avoid splitting the pins too much; you can't use a connector if there's no way to plug or unplug it! In order to clean the 20 amp connectors, the wire brush must remove some of the brass.

Be sure to use your 20 amp cleaner only when necessary. For the best results, use a clockwise/counter clockwise action.
$21.00 / EACH
Cart #: 0
Items: 0
Total: $0.00
FEATURED PRODUCT Unison Dimmer Module, ETC, D20, Dual 20A, 350µS
Dimmer Module, ETC, Unison, D20, Dual 20Amp, 350ms
FEATURED PRODUCT Arsenal® 5550 3-Inch Padded Base Layer Tool Belt, 2XL, Black
Arsenal® 5550 3-Inch Padded Base Layer Tool Belt, 2XL, Black
FEATURED PRODUCT Wireless DMX Transmitter, S-1 Micro, Leprecon
Wireless DMX Transmitter, Leprecon, S-1 Micro
email
Order by catalog #
Example FIXT-0073
ESTA Manufacturers' Choice Dealer of the Year 2005 and 2006 USITT Contributing Member Broadway Cares/Equity Fights AIDS ESTA Foundation Behind The Scenes