ENTTEC 70018 DMXEtherGate MK2 OUT, w/ 2 DMX Outputs
|
 |
|
Catalog #
DICO-0695 |
DMXEtherGate MK2 Plug & Play
The ethernet gateway
General Description:
The DMXEtherGate MK2 is the evolution of the DMXetherGate. This new DMXEthergate has 2 output or input ports, supports multiple protocols and is configured using any web browser thanks to the built-in webpage.
Features:
- Plug & Play or Configured operation
- 2 input, 2 output or 1 in 1 out ports
- RDM enabled (Talk Back)
All you need is an "IN" box at the Console, 1 (or more) "OUT" at the fixture or dimmer end and an Ethernet network in between.
Modes:
- Plug & Play: Just unpack, power the DMXEtherGate, set the universe number (1 to 6) using the dip switches, plug in the Ethernet and DMX and that's it!
- Configured: Using any web browser, log into the DMXEthergate by typing its IP address in the address bar. This mode will let you use all the power of the DMXEtherGate engine; you will have access to all the features such as: 256 universes, Remote configuration, and Node-Universe Binding
Operation (Plug & Play mode):
The DMXEtherGate IN receives DMX512 from the lighting controller; the high speed engine processes the DMX for transmission over ethernet. The packet is then sent using a UDP/IP scheme with a broadcast IP and MAC address. Every node on the same network will receive that packet. The output node will then unpack the DMX data and update its internal buffers.
Hardware
Like most ENTTEC products, the DMXEtherGate hardware fits into a robust metal 9.5 inch 1U rack. Two can be mounted side by side to form a standard 19 inch rack. The DMXEtherGate has 4 connectors: DMX512 IN or OUT depending on the model, Ethercon RJ45 and IEC power connector. The DMXEtherGate has an internal mains power supply that will accept any input voltage from 96 to 264V AC. Both nodes are CE and FCC approved.
Here's a link to the DMXEtherGate MK2 datasheet (PDF).
|
|
|
|
|
|
|
|
|
|
|
|
|
channel